Products

DiSonics have launched two new products.

POCKET-UFM

The POCKET-UFM is a light weight, truly pocket sized instrument. Its intuitive menu driven HMI makes it incredibly easy to use. Its size and the layout of its display and keypad means that it can be operated single handed. Yet all of this is achieved with no compromise in measurement performance. It even incorporates wall thickness and heat quantity measurement functionality as standard.

Specification

  • Pipe outer diameters ranging from 10 to 6500 mm.
  • Temperature range for pocket meter -10…. +65 degC.
  • IP 65 enclosure.
  • Full 128 x 68 pixel graphics display with backlight.
  • Full 17 key tactile keypad with audio feedback.
  • Integral wall thickness gauging, 2 to 20 mm as standard.
  • Battery life up to 12 hours continuous use on a standard 9V PP3 battery for easy replacement.

Features

  • Light weight and small for easy, one handed operation.
  • Intuitive installation using menu driven HMI.
  • Full set of instrument and measurement diagnostics.
  • Signal oscilloscope for sensor positioning and diagnostics.
  • Internal database of pipe, fluid and lining materials.
  • Wall thickness gauging (using optional wall thickness probe).
  • Heat quantity measurement (if inlet and outlet temperatures are known).
  • All measured values can be totalised.
  • Ability to save up to 12 configurations for different measurement points.

Performance

  • Flow/energy/wall thickness pocket multimeter.
  • Flow velocity range 0.01 to 25 m/s.
  • Resolution 0.25 mm/s.
  • Repeatability 0.15 % of measured value.
  • Accuracy +/- 0.5 % of measured value under ideal conditions.
  • Turn down ratio 1/100.
  • Measurement rate 1 Hz as standard.
  • Gas/solids < 10 % of volume.
  • Measurement: Flow velocity, Volumetric flow, Energy flow.                       

FIXED-UFM

A fixed installation, wall mounted clamp on ultrasonic flowmeter. Its intuitive menu driven HMI and the layout of its display and keypad makes it incredibly easy to use. It incorporates heat quantity measurement functionality. It can accept up to 6 optional plug in IO modules.

Specification

  • Pipe outer diameters from 10 to 6500 mm.
  • Control unit operational temperature from -10 to +65 degC.
  • Available in both 85 to 265Vac and 12 to 36Vdc PSU configurations at 10W.
  • Standard 16MB internal data-logger.
  • Standard RS232 and USB serial communications.
  • Up to 6 optional plug in IO modules including:
    • Active/Passive current Input/Output 0/4….20 mA.
    • Open Collector pulser.
    • Relay (NO and NC) output.
    • PT100 input.
    • Frequency output.
    • 0… 10Vdc output.

Features

  • Intuitive installation using menu driven HMI.
  • Full set of instrument and measurement diagnostics.
  • Signal oscilloscope for sensor positioning and diagnostics.
  • Internal database of pipe, fluid and lining materials.
  • Fluid database of sound speed, density, viscosity and SHC compensated for fluid temperature (if temperature is known from optional PT100 or 0/4… 20 mA temperature transmitter input).
  • Heat quantity measurement (if inlet and outlet temperatures are known from optional PT100 inputs, 0/4… 20 mA temperature transmitters or direct user entry).
  • Calculations made using the SHC method.
  • All measured values can be totalised.
  • Connection to PC using both serial RS232 and built in USB.
  • Serial communications can be used for device remote programming, control and datalogger.

Performance

  • Flow velocity range 0.01 to 25 m/s.
  • Resolution 0.25 mm/s.
  • Repeatability 0.15 % of measured value.
  • Accuracy +/- 0.5 % of measured value under ideal conditions.
  • Turn down ratio 1/100.
  • Measurement rate 1 Hz as standard.
  • Gas/solids < 10 % of volume.
  • Measurement: Flow velocity, Volumetric flow, Mass Flow, Energy flow.